Cisco D9054 Installation And Operation Manual page 46

Rack Installation,
Connectors
The following table describes the function and type of the various connectors:
Connector
Power
MANAGEMENT
IP TS OUT 1/IP TS
OUT 2
ALARM
292M IN
292M OUT
REF IN
ASI OUT 1/ASI OUT 2 ASI output. Two identical outputs.
ASI MON
Dual Channel Audio (with DCA card)
CH1 IN/CH2 IN
REF OUT
Multiple Channel Audio (with MCA card)
AES1/AES2
AES3/OUT, AES4/
OUT
3-6
Continued
AC power.
For control and management of local
and remote D9054 HD Encoders.
Data outputs for connection to an IP
distribution network.
Alarm relays.
HD-SDI video input according to
SMPTE-292M.
Active loop-through of HD-SDI
video input according to SMPTE-
292M.
Reference input for synchronization
to an external video source.
Monitoring of the ASI output signal.
This output signal cannot be muted.
Digital AES/EBU or embedded
audio inputs.
Reference outputs to support
external audio encoding. Supports
audio locked to internal video
according to SMPTE-276M.
Digital AES/EBU or embedded
audio inputs.
Digital AES/EBU or embedded
audio inputs, or reference outputs to
support external audio encoding.
Supports audio locked to internal
video according to SMPTE-276M.
D9054 HDTV Encoder Intstallation and Operation Guide
Function Connector Number
and Type
IEC 60320 Sheet 14
RJ45
RJ45
9-pin sub-D female
BNC
BNC
BNC
BNC
BNC
BNC
BNC
BNC
BNC
4038938 Rev A