Cisco ONS 15454 SDH E1-75 Installing

Installing the Cisco ONS 15454 SDH E1-75/120
Impedance Conversion Panel
Product Name: 15454E-E1-75BB=
This document contains a description of E1-75/120 conversion panel ("E1-75 Black Box") features,
installation procedures, and technical specifications. Use this document in conjunction with the Cisco
ONS 15454 SDH Reference Manual and the Cisco ONS 15454 SDH Procedure Guide when working with
E1-75/120 conversion panels.
This document contains the following sections:
E1-75/120 Impedance Conversion Panel Description, page 2
•
• E1-75/120 Impedance Conversion Panel Specifications, page 3
Install the E1-75/120 Conversion Panel, page 4
•
• Install Ground and Cables, page 5
Related Documentation, page 7
•
• Obtaining Documentation, page 7
Obtaining Technical Assistance, page 8
•
• Obtaining Additional Publications and Information, page 10
This document contains the following procedures:
Install the E1-75/120 Conversion Panel, page 4
Install Cables with Molex 96-Pin LFH Connectors on 120-Ohm Side, page 6
Install Cables with 1.0/2.3 Miniature Coax Connectors on 75-Ohm Side, page 6
Replace Cables with 1.0/2.3 Miniature Coax Connectors on 75-Ohm Side, page 6
For information about circuits and card capacities, see the Cisco ONS 15454 SDH Reference Manual.
Note
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2003 Cisco Systems, Inc. All rights reserved.