Setting Up The Service Stream - Cisco D9054 Installation And Operation Manual

Setting Up the Service Stream

To Set Up the Service Stream
Proceed as follows to set up the Service Stream:
1. From the user interface of the D9054 HD Encoder, click the PSI tab and the
Service Setup icon from the sub-pages.
2. Enter the Name of the service. This field can be up to 30 characters in length and
can consist of any printable character.
3. Select Enable for the service.
4. Assign a Program # to the service in the range from 1 to 65535.
5. Enter the PMT PID assigned to the service in the range from 16 to 8190. The
default values for services 1 through 8 are 8021 to 8028 respectively.
6. Enter the name of the service Provider. This field can be up to 30 characters in
length and can consist of letters and numbers.
7. Select each service element associated with the service, e.g., Video, Audio 1 (Left
and Right) and/or Audio 2 (Left and Right).
8. Click Apply.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-105