D9054 Hd Encoder - Cisco D9054 Installation And Operation Manual

D9054 HD Encoder

General Description
The design of the D9054 HD Encoder is compact. It is a 2U encoder that fits into a
19-inch rack. It features single-channel High-Definition, high-quality SDI or
composite video processing. It is targeted at uplink applications and supports
MPEG-4 part 10 MP@L4 and MPEG-4 part 10 HP@L4, Dolby
AAC passthrough audio encoding.
The D9054 HD Encoder features advanced pre-processing for optimum
performance at low bit rates. It also features an Ethernet management interface and
supports communication with a third party control system. The Ethernet
management interface supports the open SNMP communication protocol for easy
integration into the ROSA™ control and management system from Cisco or into 3rd
party SNMP managers.
The HDTV encoder also includes Picture-in-Picture (PIP) functionality which
compresses, packetizes, and produces real-time MPEG-4/AVC video at a reduced
size for Picture-in-Picture applications. It works in conjunction with the MPEG-4
H.264 video encoding engine to provide a second low-resolution video channel in
Picture-in-Picture (PIP) mode.
ROSA Control and Management
ROSA enables full control and monitoring functionality of the D9054 HD Encoder
installations with redundancy switching, error reporting and remote control.
Using the ROSA Device Configuration shell you can configure the unit and set all
the necessary parameters.
Software Update
All software in the D9054 HD Encoder is stored in non-volatile memory that can be
electrically programmed. New software releases for the D9054 HD Encoder can be
downloaded via the Ethernet 10/100 Base-T Management interface.
2-2 D9054 HDTV Encoder Intstallation and Operation Guide
®
Digital, Layer II and
4038938 Rev A