Audio Menu - Cisco D9054 Installation And Operation Manual

Audio Menu

Structure
To see the Audio menu from the Main menu press the RIGHT Arrow key twice and
the SELECT key.
Each parameter is described in the following. For instructions on how to select and
store settings, see About the Front Panel, page 4-2.
The menu has the following structure:
Layer II
Ch1 Ch2 Ch3 Ch4 Ch5 Ch6
Ch1
Control Input Sample Rate
Audio
Parameters:
Description:
4038938 Rev A
Layer II Dolby Digital
Dolby Digital
Ch7 Ch8 Ch1 Ch2 Ch3
Bit Rate > < Mode Audio PID
Control Input Sample Rate
Control
Layer II, Dolby Digital, Linear/Dolby E, and AAC.
The D9054 HD Encoder can encode the audio input according to the
Layer II, Dolby Digital, Dolby E, and AAC standards. It also accepts
either a pre-encoded Dolby Digital input, Dolby E, or AAC input.
D9054 HDTV Encoder Intstallation and Operation Guide
Audio
>
Ch4 Ch5 Ch6
Ch1
Ch1
Data Rate > < Mode
Ch1
Input Sample Rate Data Rate >
Audio
< Linear/Dolby E AAC
Linear/Dolby E
Ch1 Ch2 Ch3 Ch4 Ch5 Ch6
Ch1
Control Input Mode Audio PID
Ch1
Passthrough Audio PID
AAC
Ch1 Ch2 Ch3 Ch4 Ch5 Ch6
Ch1
< Mode Passthrough Audio PID
4-13