Section D - Setting Up The Vbi; Testing And Enabling Closed Captions - Cisco D9054 Installation And Operation Manual

Testing and Enabling Closed Captions

To Test and Enable Closed Captions
Proceed as follows to test and enable closed captions:
1. From the user interface of the D9054 HD Encoder, click the VBI tab.
2. To enable closed captions select Enable in the Closed Captions Enable field. The
selections are: Disable, 608 only and 708 only. The default is Disable.
3. Currently the D9054 HD Encoder supports closed captions Embedded in the
video signal. It cannot be changed.
4. If relevant, enable test patterns in fields 1, field 2, and 708 respectively.
5. Click Apply.
5-86

Section D - Setting Up the VBI

D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A