Setting Up The Nit - Cisco D9054 Installation And Operation Manual

Setting Up the NIT

To Set Up the NIT
Proceed as follows to set up the NIT:
1. From the user interface of the D9054 HD Encoder, click the PSI tab and then the
NIT icon from the sub-pages.
2. Select the relevant Delivery Type.
The delivery types are the following:
• cable delivery system descriptor, Setting Up the Cable NIT, page 5-117
• satellite delivery system descriptor, and Setting Up the Satellite NIT,
page 5-118
• terrestrial delivery system descriptor, and Setting Up the Terrestrial NIT,
page 5-119
• none.
The delivery system descriptors are used to transmit the physical parameters for
each transport multiplex in the network. IRDs interpret the delivery system
descriptor in order to tune to Transport Streams quickly. Select None if the
transmission does not target the end user IRD.
3. Click Apply.
5-116 D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A