Cisco D9054 Installation And Operation Manual page 6

Safety Precautions,
• Connect this product only to the power source that is indicated on the rear panel of this
product.
• If this product does not have a mains power switch, the power cord serves this purpose.
Enclosure
• Do not allow moisture to enter this product.
• Do not open the enclosure of this product unless otherwise specified.
• Do not push objects through openings in the enclosure of this product.
Cables
• Always disconnect all power cables before servicing this product.
• Always pull on the plug or the connector to disconnect a cable. Never pull on the cable
itself.
• Do not walk on or place stress on cables or plugs.
Factory service
• Refer service only to service personnel who are authorized by the factory.
vi
Continued
D9054 HDTV Encoder Installation and Operation Guide 4038938 Rev A