Cisco D9054 Installation And Operation Manual page 120

Monitoring Statistical Multiplexing,
Pool Bandwidth
This is total of the default bandwidths of all encoders in the statmux pool that the
local encoder belongs to.
Algorithm QP Level
This is the Quantization Parameter value resulting from the statmux algorithm.
Higher values indicate lower performance.
Service/PID List
Service
These are the video services output by each of the encoders in the statmux pool.
PID
These are the unique PID numbers assigned to each of the video services output by
the encoders in the statmux pool.
System Name
These are the system names of all the encoders in the statmux pool. See Reading the
System Information or Managing the System, page 5-120 for more information.
Default Bandwidth
This is the default bandwidth set for each of the encoders in the statmux pool in the
range from 3 to 20 Mbps for Main Profile encoding and 3 to 25 Mbps for High
Profile encoding.
Encode Rate
This is the encoding rate in bits/second for each of the encoders in the statmux
pool.
Leak Rate
This is the leak rate of the encoders in the statmux pool. Leak rate is the transport
packet output rate in bits/second.
5-36
Continued
D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A