Cisco D9054 Installation And Operation Manual page 80

System Menu,
Continued
Default
Parameters:
Description:
Software Version
Parameters:
Description:
Module Info, Main
Parameters:
Description:
Module Info, Audio1
Parameters:
Description:
Module Info, Audio2
Parameters:
Description:
5) The audio module has no software part number and will show N/A in the software part
number field.
6) The audio module has no software part number and will show N/A in the software part
number field.
4-26
N/A.
The D9054 HD Encoder will display a message asking you to
confirm the defaulting of the unit. Press SELECT to default and UP
or PREV to leave the menu without defaulting.
Use the default settings if you have set up the D9054 HD Encoder
with illegal and incompatible settings to get the encoder back in a
functional state.
Note: The default may take up to 10 seconds.
N/A.
The software version of the system controller.
N/A.
The hardware and the software part numbers of the main board.
N/A.
The hardware part number
audio module contains two stereo channels or 4 mono channels.
N/A.
The hardware part number
The audio module contains two stereo channels or 4 mono
channels.
D9054 HDTV Encoder Intstallation and Operation Guide
5)
of the onboard audio module. The
6)
of the optional add-on audio module.
4038938 Rev A