Cisco D9054 Installation And Operation Manual page 218

Setting the Clock Synchronization,
5. Type the IP address of the synchronization server.
Do one of the following:
• Type the synchronization Start Time and click Apply.
• Click Apply to store the entered settings and click Time Now if you want
synchronization to take affect immediately.
Note: To maintain accurate synchronization between the Copernicus server/
ROSA PC it is recommended that you synchronize once a day.
Note: After loss of power and after reset, the time setting is lost. If
synchronization is enabled, the time is sent from the Copernicus/ROSA PC
clock at the next synchronization.
5-134
Continued
D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A