Setting The Date And Time Manually - Cisco D9054 Installation And Operation Manual

Setting the Date and Time Manually

Proceed as follows to set the Date and Time:
1. From the user interface of the D9054 HD Encoder, click the System tab and the
Clock icon from the sub-pages.
ROSA displays the internal date and time of the D9054 HD Encoder.
2. Type the new date and time in the format YYYY/MM/DD HH:MM:SS in the
Current Time field according to the 24-hour clock.
"YYYY" designate the year, "MM" the month, "DD" the day, "HH" the hours,
"MM" the minutes and "SS" the seconds.
3. Click Apply.
Note: After loss of power and after reset, the time setting is lost. If synchronization
is enabled, the time is sent from the Copernicus/ROSA PC clock at the next
synchronization.
5-132 D9054 HDTV Encoder Intstallation and Operation Guide 4038938 Rev A