Table of Contents
Advertisement
Setting Up the Layer II Audio Input,
13. Set the Bandwidth Mode. This option is only applicable to MCA cards.
This parameter allows you to set the quality of the audio vs. bandwidth. The
default setting is Low.
Setting
Low
High
Full
14. Click Apply.
4038938 Rev A
Continue
Description
This the most conservative setting. Some high
frequencies may be lost, but no coding artifacts will be
audible.
This setting is less conservative. A wider frequency
spectrum will be covered. Coding artifacts for most
audio material will not be audible.
This setting provides the highest (full) bandwidth
range regardless of audio quality; however, more
coding artifacts will be audible than at the other
settings.
D9054 HDTV Encoder Intstallation and Operation Guide
5-49
Hide quick links:
Advertisement
Table of Contents
