Section B - Front Panel Leds; Introduction - Cisco D9054 Installation And Operation Manual

Introduction

Overview
To help signal the status of operation or the presence of an alarm, the D9054 HD
Encoder makes use of front panel LEDs.
The photograph below shows the location of the LEDs on the front panel of the
D9054 HD Encoder.
LED Function
The function of the LEDs is described in the table below.
LED
POWER
ALARM
4038938 Rev A

Section B - Front Panel LEDs

Signal Explanation
Green The D9054 HD Encoder is
correctly powered.
Flashing Initialization is in process.
Off There is no power present.
Red An A-alarm is active.
Off No A-alarm is active.
D9054 HDTV Encoder Intstallation and Operation Guide
Alarm
Power
Remedy
N/A
N/A
Check the AC line supply.
Read the message in the GUI.
N/A
6-3