Ordering Components - Oracle Sun Fire X2270 M2 Service Manual

Insert the USB flash drive containing the contents of the Tools and Drivers CD into an available
4
USB port on the Sun Fire X2270 M2 Server.
Power on (or reboot) the Sun Fire X2270 M2 Server.
5
The BIOS screen appears.
In the BIOS screen, press F8 to specify a temporary boot device.
6
The Select Boot Device menu appears.
In the Boot Device menu, select the USB flash drive as the first boot device, then press Enter.
7
Save the changes and exit the system BIOS.
8
The system automatically boots to the USB flash drive.
Navigate to the directory on the USB flash drive that contains the contents of the Tools and
9
Drivers CD.
In the terminal window, type the following command to run the recovery program:
10
-> run recovery.bat
When the recovery program is completed, disconnect the AC power connection from the server
11
for 30 seconds, then reconnect the AC power.
Because the default ILOM and BIOS settings are automatically loaded when the SP and BIOS
firmware is flashed, you might need to reset some of the ILOM and BIOS settings.

Ordering Components

You can order additional components and replacement parts for the Sun Fire X2270 M2 Server.
Contact your local Oracle sales representative for more information. For the most up-to-date
component information, refer to the components list on the following web site:
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/index
Ordering Components
93