Hard Drive Leds - Oracle Sun Fire X2270 M2 Service Manual

LED Name
1 Server Locate LED
2 Server Service Action
Required LED
3 Power OK LED
4 Power Button

Hard Drive LEDs

For each hard disk (HD) there are three LEDs.
Color Activity
White Use to identify a server in a rack. Activate locally by pressing the
Locate button or activate remotely using the ILOM.
■ Off: Normal
■
On: Blinking
Amber The SP monitors the health of the system and activates the Service
Action Required LED.
■ Off: Normal operation
■
Slow blink: A new (unacknowledged) event that requires a service
action has been detected.
■
Steady on: An event has been acknowledged, but the problem still
requires attention.
The following conditions cause the SP to activate the Service Action
Required LED:
■
Voltage outside thresholds.
■
Temperature above thresholds.
■ Fan speed below thresholds (or not present).
■
24 correctable errors have occurred in a 24 hour period.
■ One correctable error has occurred.
Green Use to discern the power state of the server.
■ Steady On: Full-power mode on and OK.
■
Blinking: Standby power is on, but main power is off
■
Quick blink: in POST, diagnostics running
■
Off: No power. AC cords not attached.
For more on power modes, see
Hard Drive LEDs
"Power Modes" on page 27.
79