Oracle Sun Fire X2270 M2 Service Manual page 57

▼
How to Remove the Hard Drive Backplane
See:
Before You Begin
"Locations of Internal Server Components" on page 30
■
"Sun Fire X2270 M2 Server Internal Cabling" on page 61
■
Prepare the server for service. See
1
Remove all hard drives. See
2
This ensures that HD/SSDs are detached from the backplane assembly.
Remove the air duct. See
3
Disconnect the HD/SSD power cable connector and the four SATA cable connectors from the
4
backplane assembly.
Remove the eight screws fastening the backplane assembly to the server chassis.
5
Carefully lift the backplane assembly from the server chassis.
6
"How to Install the Hard Drive Backplane" on page 58
Next Steps
"How to Prepare for Service"on page
"How To Remove a Removable Hard Drive Assembly"on page
"How to Remove the Air Duct"on page
Replacing the Hard Drive Backplane Assembly (FRU)
21.
53.
50.
57