Oracle Sun Fire X2270 M2 Service Manual page 21

▼
How to Prepare for Service
Review the Sun Fire X2270 M2 Server
1
The Product Notes contain update information about issues related to hardware and software.
Review the safety information. See
2
Review ESD procedures. See
3
Power off the server. See
4
Disconnect the AC power cords from the rear of the server.
5
Power off all of the peripherals connected to the server.
6
Label and disconnect all cables attached to the rear of the server.
7
Remove the server from the rack. See
8
For some procedures it is not necessary to remove the server from the rack. To determine
Note –
whether to remove the server, review the procedure before proceeding.
Place the server in a location with ample space and light.
9
Remove the server cover. See
10
Use a vacuum, compressed air, or an antistatic brush to clean the interior of the server so
11
component surfaces and server air vents are free of dust.
Potential for component damage. Do not use liquid or aerosol spray cleaners to clean
Caution –
the server. Liquid has the potential for causing shorts in electrical systems.
Sun Fire X2270 M2 Server Product
"Important Safety Information"on page
"Antistatic Procedures and Precautions"on page
"How to Power Off the Server"on page
"How to Remove the Server from the Rack"on page
"How to Remove the Server Cover"on page
Tools and Supplies Needed
Notes.
17.
18.
28.
25.
22.
21