Oracle Sun Fire X2270 M2 Service Manual page 64

Replacing the Front I/O Board (FRU)
Reconnect the I/O cable to the I/O board.
3
Check the routing of all cables for obstructions.
4
Prepare the server for operation.
5
"How to Remove the Front I/O Cable" on page 63
See Also
Replacing the Front I/O Board (FRU)
Note –
Service Technician.
This section contains the following topics:
"How to Remove the I/O Board" on page 64
■
"How to Install the I/O Board" on page 66
■
▼
How to Remove the I/O Board
See:
Before You Begin
"Locations of Internal Server Components" on page 30
Prepare the server for service. See
1
Remove the air duct. See
2
64 Sun Fire X2270 M2 Server Service Manual • January, 2012, –12
The front I/O board is a field-replaceable unit. It must be replaced by a certified Oracle
"How to Remove the Air Duct"on page
"How to Prepare for Service"on page 21.
53.