Web Interface - Oracle Sun Fire X2270 M2 Service Manual

Updating BIOS and SP Firmware
For example:
-> load -source tftp://ipaddress/X2270M2-xxx_xxxx.pkg
Type y to load the specified file.
6
Type y to preserve your ILOM configuration settings. If not, the settings will be overwritten by
7
the firmware default.
Type n to upgrade BIOS after ILOM is upgraded.
8
The BIOS and ILOM SP firmware update begins.
Note –
update is finished.
Caution –
complete. Do not press the Power button until the SP is booted and the server is in
standby-power mode.
▼
How to Update the BIOS and SP Firmware Using the

Web Interface

You can update BIOS and ILOM SP firmware using the ILOM web interface. Refer to the Sun
Integrated Lights Out Manager 3.0 User's Guide for more information about setting up and using
the ILOM software.
Start the ILOM SP web interface by typing the IP address of the SP into a browser.
1
Copy the file /firmware/webgui_cli/version/SP_file from the webgui_cli directory located
2
on the Tools and Drivers CD to the remote system that is running the ILOM web interface.
where version is the version of the Tools and Drivers CD you are using and SP_file is the name
of the SP image.
For example: /firmware/webgui_cli/1.0.0/X2270M2-3.0.9.20.pkg
Ensure that the OS on the platform is shut down.
3
Log in to the SP ILOM web interface with Administrator privileges.
4
Select Maintenance --> Firmware Upgrade tabs.
5
The Firmware Upgrade page appears.
90 Sun Fire X2270 M2 Server Service Manual • January, 2012, –12
During the upgrade process, the login prompt appears. Do not attempt to log in until the
Possible firmware corruption. The update is not finished until the SP reboot is