Oracle Sun Fire X2270 M2 Service Manual page 68

Removing, Installing, and Adding a CPU and Heatsink (FRU)
Place the heatsink upside down on a flat surface to prevent the thermal compound from
6
contaminating other components or the work space.
To open the socket release lever, push the lever down and move it slightly away from the CPU.
7
This action releases the lever from the retaining clip.
Lift the lever to its fully-opened position.
8
Lift the CPU cover to its fully-opened position.
9
Remove the CPU, leaving the release lever in the open position.
10
Note –
contact with the CPU socket or underside of the CPU chip.
"How to Install a CPU and Heatsink" on page 68
Next Steps
▼
How to Install a CPU and Heatsink
See:
Before You Begin
"Locations of Internal Server Components" on page 30
■
"How to Remove a CPU and Heatsink" on page 67
■
Ensure that the socket release lever and the CPU cover are in their fully-open position.
1
68 Sun Fire X2270 M2 Server Service Manual • January, 2012, –12
Ensure that no thermal compound that might be left from the heatsink comes into