Oracle Sun Fire X2270 M2 Service Manual page 48

Removing and Installing a Hard Drive Filler and Hard Drive Assembly (CRU)
Route the HD/SSD power cable through the opening in the chassis divider (3).
4
Connect three of the power supply cables to the motherboard (4).
5
Connect the power supply cable to the hard disk backplane.
6
Install the air duct. See
7
Prepare the server for operation. See
8
Removing and Installing a Hard Drive Filler and Hard
Drive Assembly (CRU)
This section contains the following topics:
"How to Remove a Hard Drive Filler" on page 48
■
"How to Install a Hard Drive Filler" on page 49
■
"How To Remove a Removable Hard Drive Assembly" on page 50
■
"How to Install a Removable Hard Drive Assembly" on page 51
■
▼
How to Remove a Hard Drive Filler
Caution –
populated with either a drive of a filler.
If your server contains a filler panel, remove the filler panel before installing a hard drive.
48 Sun Fire X2270 M2 Server Service Manual • January, 2012, –12
"How to Install the Air Duct"on page
Thermal over-temperature potential. Do not operate the server without all drive slots
53.
"How to Prepare for Operation"on page 26.