Oracle Sun Fire X2270 M2 Service Manual page 46

Removing and Installing a Power Supply (CRU)
Reference the following illustration for this procedure.
3
Note the numbered panels.
Disconnect the three power supply cables from the motherboard (1).
4
Disconnect the power supply cable from the hard drive backplane and push the cable through
5
the cutout in the chassis divider (2).
Loosen the captive screw that secures the power supply to the chassis (3).
6
Lift the power supply out of the chassis (4).
7
"How to Install the Power Supply" on page 47
Next Steps
46 Sun Fire X2270 M2 Server Service Manual • January, 2012, –12