Table of Contents
Advertisement
Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
?go
Related Information
"Configure the Preinstalled OS" on page 71
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 72
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 74
■
"Assign a Static IP Address to the NET MGT Port" on page 79
■
Reach a State to Install a Fresh OS (Oracle ILOM
Web Interface)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS.
1.
Prepare the appropriate boot media according to your installation method.
There are many methods by which you can install the OS. For example, you can boot and install
the OS from external media or from another server on the network. For more information, refer
to Installing Oracle Solaris 11 Systems, comparing installation options at:
http://www.oracle.com/goto/solaris11/docs
2.
If you have not done so, perform these tasks to access the Oracle ILOM web
interface on the server:
a.
In a browser on the same network as the system, type the IP address of the
SPM.
b.
Log in to Oracle ILOM by typing your user name and password.
In the Oracle ILOM web interface, in the left navigation pane, choose Host
3.
Management -> Host Boot Mode.
The Host Boot Mode page is displayed.
4.
Apply these changes to the host boot mode settings:
For State, select: Reset NVRAM
■
This setting applies a one-time NVRAM (OpenBoot) change based on the script setting,
then resets the NVRAM to default settings on the next host reset.
74
SPARC T8-4 Server Installation Guide • September 2017
- if executable program, execute it
or if Forth program, compile it
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T8-4 and is the answer not in the manual?
Questions and answers