Static Routes; Table 7: Ucm6510 Network Settings->Static Routes - Grandstream Networks UCM6510 User Manual

STATIC ROUTES

A static route is a pre-determined path that the network traffic travels to reach a specific host or network.
On the UCM6510, the static route function allows the device to use manually configured routes, rather
than dynamically assigned routes or default gateway configured in the UCM6510 web GUI->Network
Settings->Basic Settings to forward traffic. It can be used to define a route when no other routes are
available or necessary, or used in complementary with existing routing on the UCM6510 as a failover
backup, and etc.

Click on
in the table below.

Once added, users can select

Select to delete the static route.

Static routes configuration can be reset from LCD menu->Network Menu.
Destination
Netmask
Gateway
Interface
Firmware Version 1.0.0.25
to create a new static route. The configuration parameters are listed
to edit the static route.
Table 7: UCM6510 Network Settings->Static Routes
Configure the destination IP address or the destination IP subnet for the
UCM6510 to reach using the static route.
Example:
IP address - 192.168.66.4
IP subnet - 192.168.66.0
Configure the subnet mask for the above destination address. If left blank, the
default value is 255.255.255.255.
Example:
255.255.255.0
Configure the gateway address so that the UCM6510 can reach the destination
via this gateway. Gateway address is optional.
Example:
192.168.40.5
Specify the network interface "LAN" or "WAN" on the UCM6150 to reach the
destination using the static route.
UCM6510 IP PBX User Manual Page 38 of 233