Static Routes; Table 7: Ucm6200 Network Settings802.1X; Table 8: Ucm6200 Network SettingsStatic Routes - Grandstream Networks UCM6202 User Manual

802.1X Mode
Identity
MD5 Password
802.1X Certificate
802.1X Client
Certificate

Static Routes

The UCM6200 provides users static routing capability that allows the device to use manually configured routes,
rather than information only from dynamic routing or gateway configured in the UCM6200 Web GUISystem
SettingsNetwork SettingsBasic Settings to forward traffic. It can be used to define a route when no other
routes are available or necessary, or used in complementary with existing routing on the UCM6200 as a failover
backup, etc.
•
Click on
•
Once added, users can select
•
Select to delete the static route.
Destination
Netmask
Table 7: UCM6200 Network Settings802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:
•
EAP-MD5
•
EAP-TLS
•
EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode Identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.
to create a new static route. The parameters are listed in below table.
to edit the static route.
Table 8: UCM6200 Network SettingsStatic Routes
Configure the destination IP address or the destination IP subnet for the UCM6200
to reach using the static route.
Example:
IP address - 192.168.66.4
IP subnet - 192.168.66.0
Configure the subnet mask for the above destination address. If left blank, the
default value is 255.255.255.255.
Example:
255.255.255.0
UCM6200 Series User Manual
P a g e | 50