Static Routes; Table 6: Ucm6510 Network Settings->802.1X; Table 7: Ucm6510 Network Settings->Static Routes - Grandstream Networks UCM6510 IP PBX User Manual

802.1X Mode
Identity
MD5 Password
802.1X CA Certificate
802.1X Client
Certificate

STATIC ROUTES

A static route is a pre-determined path that the network traffic travels to reach a specific host or network.
On the UCM6510, the static route function allows the device to use manually configured routes, rather
than dynamically assigned routes or default gateway configured in the UCM6510 web GUI->Network
Settings->Basic Settings to forward traffic. It can be used to define a route when no other routes are
available or necessary, or used in complementary with existing routing on the UCM6510 as a failover
backup, and etc.

Click on
in the table below.

Once added, users can select

Select to delete the static route.

Static routes configuration can be reset from LCD menu->Network Menu.
Destination
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Table 6: UCM6510 Network Settings->802.1X
Select 802.1X mode. The default setting is "Disable". The supported 802.1X
mode are:

EAP-MD5

EAP-TLS

EAP-PEAPv0/MSCHAPv2
Enter 802.1X mode identity information.
Enter 802.1X mode MD5 password information.
Select 802.1X certificate from local PC and then upload.
Select 802.1X client certificate from local PC and then upload.
to create a new static route. The configuration parameters are listed
to edit the static route.
Table 7: UCM6510 Network Settings->Static Routes
Configure the destination IP address or the destination IP subnet for the
UCM6510 to reach using the static route.
Example:
UCM6510 IP PBX User Manual Page 36 of 229