Static Routes; Table 9: Ucm6510 Network Settings802.1X; Table 10: Ucm6510 Network SettingsStatic Routes - Grandstream Networks UCM6510 User Manual

Select 802.1X mode. The default setting is "Disable". The supported 802.1X mode
are:
•
802.1X Mode
•
•
Identity Enter 802.1X mode Identity information.
MD5 Password Enter 802.1X mode MD5 password information.
802.1X CA Certificate Select 802.1X certificate from local PC and then upload.
802.1X Client
Select 802.1X client certificate from local PC and then upload.
Certificate

Static Routes

A static route is a pre-determined path that the network traffic travels to reach a specific host or network.
On the UCM6510, the static route function allows the device to use manually configured routes, rather than
dynamically assigned routes or default gateway configured in the UCM6510 Web GUINetwork
SettingsBasic Settings to forward traffic. It can be used to define a route when no other routes are
available or necessary, or used in complementary with existing routing on the UCM6510 as a failover
backup, and etc.
•
Click on
in the table below.
•
Once added, users can select
•
Select to delete the static route.
•
Static routes configuration can be reset from LCD menuNetwork Menu.
Configure the destination IP address or the destination IP subnet for the UCM6510
to reach using the static route.
Destination Example:
IP address – 192.168.66.4
IP subnet – 192.168.66.0
Configure the subnet mask for the above destination address. If left blank, the
Netmask default value is 255.255.255.255.
Example: 255.255.255.0
Table 9: UCM6510 Network Settings802.1X
EAP-MD5
EAP-TLS
EAP-PEAPv0/MSCHAPv2
to create a new static route. The configuration parameters are listed
to edit the static route.
Table 10: UCM6510 Network SettingsStatic Routes
UCM6510 IP PBX User Manual
P a g e | 62