Spanning-Tree Max-Age; Spanning-Tree Mode - Zte ZXR10 Command Manual

Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
This example describes how to set the link type of the interface
fei_3/1 to p2p.
ZXR10(config)#interface fei_3/1
ZXR10(config-if)#spanning-tree linktype p2p
spanning-tree packet-type

spanning-tree max-age

Use this command to set the maximum age of the STP BPDU
packet. Restore default with the no form of this command.
Global configuration
spanning-tree max-age <time>
no spanning-tree max-age
<time>
The platform version 4.6.02 and upgrade versions support this
command.
This example describes how to set the max-age to 21 seconds.
ZXR10(config)#spanning-tree max-age 21
spanning-tree max-hops
spanning-tree forward-delay

spanning-tree mode

Use this command to set the current STP mode.
Global configuration
spanning-tree mode {sstp | rstp | mstp}
sstp
rstp
mstp
MSTP
� The platform version 4.6.02 and upgrade versions support this
command.
� Each mode allows the connection to the bridge.
This example describes how to set the current STP mode to RSTP.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 STP Configuration
Maximum age of the STP BPDU packet, in
seconds, in the range of 6~40, default: 20
seconds
SSTP mode
RSTP mode
MSTP mode
63