Ingress Filtering; Interface - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
22 Confidential and Proprietary Information of ZTE CORPORATION
all
tag
All the frame types are acceptable.
Use the show running-config command on the interface to dis-
play the configuration.
This example describes how to configure the interface fei_1/1 to
receive tag frames only.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#acceptable frame types tag
show interface

ingress filtering

Use this command to set the ingress filtering for an interface.
Interface configuration
ingress filtering {enable | disable}
enable
disable
The ingress filtering is enabled by default.
Use the show running-config command on the interface to dis-
play the configuration.
This example describes how to enable ingress filtering on the in-
terface fei_1/1.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ingress filtering enable
show run interface

interface

Use this command to create a VLAN interface and enter VLAN in-
terface configuration mode. Delete the VLAN interface with the no
form of this command.
Global configuration
interface {vlan <vlan-id>|<vlan-if>}
no interface {vlan <vlan-id>|<vlan-if>}
All the frame types can be received
tag frames only
Enables ingress filtering
Disables ingress filtering