Mac Unknow-Filter-Limit-Num; Mac Unknowsource-Filter - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
14 Confidential and Proprietary Information of ZTE CORPORATION
Global configuration
mac transparent-control {disable | enable}
enable
disable
This command is supported by ZXR10 3900/5900/5200 in single
mode. This command is used to enable or disable the transparent
function of the MAC address.
This example describes how to enable the transparent function of
the MAC address.
ZXR10(config)#mac transparent-control enable
show mac transparent_control

mac unknow-filter-limit-num

Use this command to configure the limitation of the number of
learning and forwarding MAC addresses.
Global configuration
mac unknow-filter-limit-num [interface <port-name>]< limi
t-num >
interface <port-na
me>
< limit-num >
This command is supported by ZXR10 3900/5900/5200.
This example describes how to configure the limitation of MAC ad-
dress numbers on the interface.
ZXR10(config)#mac unknow-filter-limit-num interface fei_1/1 15
show mac running

mac unknowsource-filter

Use this command to configure the unknown source MAC filter
function.
Global configuration
mac unknowsource-filter interface <port-name>{disable |
enable}
Enables the transparent function of the MAC
address
Disables the transparent function of the MAC
address
Ethernet physical port
Limitation of the number, range: 0~16384