Mac Learning-Strategy; Mac Transparent-Control - Zte ZXR10 Command Manual

Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
mac to-static [interface <port-name>|<vlan-id>]{disable |
enable}
interface <port-na
me>
<vlan-id>
disable
enable
This command is used to translate the dynamic MAC address on
the port into the static MAC address. And it no longer participates
in the aging. The executing result of this command is not written
into the database.
This example describes how to translate the dynamic MAC address
into the static address on the interface fei_1/1.
ZXR10(config)#mac to－static ethernet fei_1/1 enable
show mac

mac learning-strategy

Use this command to configure the MAC learning strategy (chip
learning/network processor learning).
Global configuration
mac learning-strategy {driver | micode}
driver
micode
This command is applied to ZXR10 T160G/7800.
This example describes how to configure the MAC learning strategy
to NP method.
ZXR10(config)#mac learn special
ZXR10(config)#mac learning-strategy micode
show mac learning-strategy

mac transparent-control

Use this command to enable or disable the transparent function of
the MAC address.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 MAC Configuration
Ethernet physical port
VLAN ID, range: 1~4094
Disables the dynamic MAC address to be
translated into the static MAC address
Enables the dynamic MAC address to be
translated into the static MAC address
Chip learning
Network processor learning
13