Vlan List; Vlan Private-Map - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
36 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(vlan-db)#

vlan list

Use this command to enter VLAN global configuration mode.
Global configuration
vlan list <vlan-list>
<vlan-list>
After the enter of this mode , VLANs can be created or deleted in
batch. Notice that after the batch configuration, the operation of
hot-plug or Active/standby Changeover is performed after a while.
Otherwise, part of entries are lost because the database synchro-
nization has not been finished.
This example describes how to enter VLAN global configuration
mode.
ZXR10(config)#vlan list

vlan private-map

Use this command to set the isolate and promiscuous ports for
the Private VLAN. Remove the setting with the no form of this
command.
Global configuration
The command format on ZXR10 5900:
vlan private-map session-id <id>[isolate <port-list>][promis
<port-list>]
no vlan private-map session-id <id>
The command format on ZXR10 T240G/T160G:
vlan private-map session-id <id>[isolate <port-list>][promis
<port-list>][community <port-list>][vlan <vlan-list>]
vlan private-map change {add | del}<id>{[isolate <port-list
>]|[promis <port-list>]|[community <port-list>]|[vlan <vlan-
list>]}
no vlan private-map session-id <id>
The command format on ZXR10 3900:
vlan private-map session-id <id><isolate <port-list>><pro
mis <port-list>>
no vlan private-map session-id <id>
Creates the VlAN identifier.It can be
configured in batches