Vlan Subnet-Map (Port Enabling); Vlan Translate - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
42 Confidential and Proprietary Information of ZTE CORPORATION
show vlan subnet-map
vlan subnet-map (Port
Enabling)
Use this command to enable/disable subnet-based VLAN division
on the interface.
Interface configuration
vlan subnet-map {enable | disable}
enable
disable
This function is enabled on the interface by default.
The platform version 4.6.02 and upgrade versions support this
command.
This example describes how to disable subnet-based VLAN division
on interface fei_1/1.
ZXR10(config)#int fei_1/1
ZXR10(config-vlan)#vlan subnet-map disable
show vlan subnet-map

vlan translate

Use this command to set the VLAN translation rule. Delete the
setting with the no form of this command.
Global configuration
vlan translate session-no <session_id> ingress-port| egress
-port <interface-name> ingress-vlan <vlan-list> egress-vlan
<vlanId>[uplink-port <interface-name>]
no vlan translate session-no <session_id>[ingress-port|
egress-port <interface-name> ingress-vlan <vlan-list>][upli
nk-port <interface-name>]]
The command format on ZXR10 T160G:
vlan translate session-no <session_id>[ingress-port <interfa
ce-name>|[egress-port <interface-name>] ingress-vlan <vlan
-list> egress-vlan <vlanId> advance <interface-name>
vlan translate change {add | del}<session_id>{ingress-vlan
<vlan-list>| egress-vlan <vlanId>| advance <interface-nam
e>}
no vlan translate session-no <session_id>
Enables this function on the interface
Disables this function on the interface