Mac Ping Configuration; Mac-Ping - Zte ZXR10 Command Manual

Purpose
Command Mode
Syntax
Syntax
Description
Defaults
Example
8
C h a p t e r

MAC PING Configuration

Table of Contents

mac-ping..........................................................................77

l2trace .............................................................................78
mac-ping
Use this command to detect the Ethernet link by using private pro-
tocol.
Privileged EXEC
mac-ping <destination-mac>{interface <out-port>| vfi <vfi-n
ame> peer <peer-address>}{summary | detail}[repeat <rep
eat-count>][hops <hop-count>][timeout <timeout seconds>]
<destination-mac>
interface <out-por
t>>
summary
detail
repeat <repeat-cou
nt>
hops <hop-count>
timeout <timeout
seconds>
vfi <vfi-name>
peer <peer-address>
This command is disabled by default.
The example describes how to detect the reachability of the des-
tination MAC through MAC-PING.
ZXR10#mac-ping 00d0.d0c0.0090 port fei_1/1 detail
Confidential and Proprietary Information of ZTE CORPORATION
Destination MAC address
Egress interface of the CE device where
request packets are transmit
Briefly lists the result of MAC ping.
Lists the result of MAC ping in detail.
Repeat count, range: 1~65535, default: 1
Hop count, range: 1~10, default: 5
Timeout interval, in seconds, range: 1~30,
default: 2 seconds
VFI name to be detected on the PE device
Peer router identifier to be detected on the
PE device
77