Swicthport - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
28 Confidential and Proprietary Information of ZTE CORPORATION
All modes except user EXEC
show vlan translate [<session id>]
<session id>
� The platform version 4.6.02 and upgrade versions support this
command.
� If there is no parameter after this command, information about
the configuration of all VLAN translations is displayed.
� ZXR10 3900 does not support this command.
� This example describes how to display information about the
configuration of all VLAN translations.
ZXR10#show vlan translate
Session_no In_Port E_Port In_vlan E_vlan Advance Uplink-ports
-------------------------------------------------------------
1 gei_4/1
2 gei_4/5
3 gei_4/6
� This example describes how to display information about the
configuration of one VLAN translation.
ZXR10#show vlan trans 1
Session_no In_Port E_Port In_vlan E_vlan Advance Uplink-ports
-------------------------------------------------------------
1 gei_4/1
The displayed field descriptions are displayed as follows.
Field
Session-no
Ingress-
port(In_Port)
egress-port(E_Port)
Ingress-
vlan(In_vlan)
Egress-vlan(E_vlan)
Advance
Uplink-ports
vlan translate

swicthport

Use this command to set batch processing for VLAN ports.
VLAN configuration
switchport {pvid | tag | untag}<port-list>
Session ID of the designated PVLAN
10-20 2 1
30 3 0
6-7 10 0
10-20 2 1
Description
Session number
Ingress port
Egress port
Ingress VLAN
Egress VLAN
Uplink-port symbol
Uplink port
gei_4/2
gei_4/2