Spanning-Tree Mst Configuration; Spanning-Tree Mst Hmd5-Digest - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
64 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config)#spanning-tree mode rstp
spanning-tree
spanning-tree mst
configuration
Use this command to enter MSTP configuration mode.
Global configuration

spanning-tree mst configuration

� The platform version 4.6.02 and upgrade versions support this
command.
� In MSTP configuration mode, exclusive parameters of MSTP
users configure include: MST configuration name, MST config-
uration version number, and configuration digest.
This example describes how to enter MSTP configuration mode.
ZXR10(config)#spanning-tree mst configuration
ZXR10(config-mstp)#
show spanning-tree mst configuration
spanning-tree mst
hmd5-digest
Use this command to set the digest value for the mst_config_id.
Restore default with the no form of this command.
Global configuration
spanning-tree mst hmd5-digest { CISCO | HUWWEI <key>}
no spanning-tree mst hmd5-digest { CISCO | HUAWEI }
<key>
The default value is 0x00000000000000000000000000000000.
� The platform version 4.6.02 and upgrade versions support this
command.
� When the different manufacturers (such as CISCO and
HUAWEI) implement MSTP, the MSTP packet format is different
from the IEEE standard. The KEY or DIGEST value has to be
configured for the ZTE switch before the devices of the above
manufacturers are connected in the same area.
This example describes how to set the CISCO hmd5-digest value.
32-bit hexadecimal number starting with 0x,
with the total length of 34 bits