Zte ZXR10 Command Manual page 48

ZXR10 Command Manual (Ethernet Switch Volume)
Instructions
Example
40 Confidential and Proprietary Information of ZTE CORPORATION
<vlan-list>
<vlanId>
<name>
<priority-list>
For ZXR10 3900:
<session_id>
customer-port
<interface-name>
uplink-port
<interface-name>
<vlan-list>
<vlanId>
customerbrg-port
<interface-name>
uplinkbrg-port
<interface-name>
For ZXR10 5900:
<session_id>
customer-port
<interface-name>
uplink-port
<interface-name>
<vlan-list>
<vlanId>
�
The platform version 4.6.02 and upgrade versions support this
command.
� The SVLAN configuration uses different formats for ZXR10
T160G and ZXR10 3900.
� This example describes how to create session 1, set the cus-
tomer port to gei_5/1, set the uplink port to gei_5/2, attach
the external label ovlan 1000 to packets from invlans 100~200
and map the priority from the internal side to the external side:
for: ZXR10 69 series:
ZXR10(config)# vlan qinq session-no 1 customerbrg-port gei_5/1
uplinkbrg-port gei_5/2 invlan 100-200 ovlan 1000 priority mapping
for ZXR10 39 series:
ZXR10(config)# vlan qinq session-no 1 customerbrg-port gei_5/1
uplinkbrg-port gei_5/2 invlan 100-200 ovlan 1000 customerbrg-port
gei_5/3 uplinkbrg-port gei_5/4 mapping
Ingress VLAN list
External label VLAN ID
External label VLAN name
Packet priority, range: 0~7
Session ID, range: 1~100
Customer port
Uplink port
External label VLAN ID
External label VLAN name
Bridge port of the customer port
Bridge port of the uplink port
Session ID, range: 1~78
Customer port
Uplink port
External label VLAN ID
External label VLAN name