Vlan (Vlan Database Configuration); Vlan Database - Zte ZXR10 Command Manual

Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
This example describes how to create VLAN 2.
ZXR10(config)#vlan 2
ZXR10(config-vlan)#
show vlan
vlan (VLAN Database
Configuration)
Use this command to create VLANs in batches. Delete VLANs in
batches with the no form of this command.
VLAN database configuration
vlan <vlan-list>[name <vlan-name>]
no vlan <vlan-list>[name]
<vlan-list>
name <vlan-name>
The alias is configured for single VLAN only. It is not allowed that
multiple VLANs have the same alias. When users delete a batch
of VLANs, if one VLAN is VLAN 1 or there is the Layer 3 interface,
the system prompts error information.
This example describes how to enter VLAN database configuration
mode, and create VLANs 2~100.
ZXR10#vlan database
ZXR10(vlan-db)#vlan 2-100

vlan database

vlan database

Use this command to enter VLAN database configuration mode.
Privileged EXEC
vlan database
After the enter of this mode , VLANs can be created or deleted in
batch. Notice that after the batch configuration, the operation of
hot-plug or Active/standby Changeover is performed after a while.
Otherwise, part of entries are lost because the database synchro-
nization has not been finished. There must be interval between
continuous batch operations.
This example describes how to enter VLAN database configuration
mode.
ZXR10#vlan database
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 VLAN Configuration
VLAN list, which can be a list of VLAN IDs
(range: 1~4094) or VLAN names
VLAN name
35