Show Mac Aging-Time - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Modes
Syntax
Example
16 Confidential and Proprietary Information of ZTE CORPORATION
srF-source filter,dsF-destination filter,time--day:hour:min:sec
Frm --mac from where:0,drv; 1,config; 2,VPN; 3,802.1X; 4,micro
MAC_Address port
------------------------------------------------------------
00d0.d0c0.1320 fei_1/1 1
Descriptions of the displayed fields are shown below.
Field
MAC_Address
port
vid
stat
perma
toSta
src_filter
dst_filter
Frm
vpnid
Time
mac add
mac delete
mac to-static
mac filter

show mac aging-time

Use this command to display the aging time of the dynamic MAC
address of the switch.
All modes

show mac aging-time

This example describes how to display the aging time of the MAC
address of the switch.
ZXR10#show mac aging-time
The MAC Address aging time is 60 seconds
vid stc per toS srF dsF Frm vpnid Time
0 0 1 0
Description
MAC_address in dotted division format
Port where the MAC address is located
VLAN ID where the MAC address is located
Static flag of the MAC address
Permanent MAC address flag
Solidified MAC address flag
Whether to filter the frames of the source
MAC address.
Whether to filter the frames of the destination
MAC address
Source of the MAC address (drive,
configuration, VPN, 802.1x and microcode)
VPN identifier
Time when the MAC address is learned
0 1 0 0:00:43:41