Switchport Hybrid Native Vlan; Switchport Hybrid Vlan - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
30 Confidential and Proprietary Information of ZTE CORPORATION
show vlan

switchport hybrid native vlan

Use this command to configure the native VLAN for the hybrid port.
If the VLAN does not exist, it is created. Restore default with the
no form of this command.
Interface configuration
switchport hybrid native vlan {<vlan-id>|<vlan-name>}
no switchport hybrid native vlan
<vlan-id>
<vlan-name>
The native VLAN is VLAN 1 by default.
� The ports on which this command is executed must be in hybrid
mode. Otherwise, the system prompts error information.
� Use the show running-config command to display the con-
figuration on the interface.
This example describes how to set the native VLAN of the hybrid
port fei_1/1 to VALN 10.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#switch hybrid native vlan 10
show vlan

switchport hybrid vlan

Use this command to add a hybrid port to a VLAN. If the VLAN
does not exist, it is created. Remove a hybrid port from a VLAN
with the no form of this command.
Interface configuration
switchport hybrid vlan <vlan-list>[tag | untag]
no switchport hybrid vlan <vlan-list>
<vlan-list>
tag
untag
The Layer 2 port is in VLAN 1 by default.
VLAN ID, range: 1~4094
VLAN name
VLAN list, which can be a list of VLAN IDs
(range: 1~4094) or VLAN aliases
Ports labeled as tag
Ports labeled as untag