Set Ethernet-Oam Link-Monitor Frame-Seconds; Set Ethernet-Oam Link-Monitor Symbol-Period - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
88 Confidential and Proprietary Information of ZTE CORPORATION
set ethernet-oam
link-monitor frame-seconds
Use this command to configure port error symbol frame—seconds
statistics link event parameters.
Interface Configuration
set ethernet-oam link-monitor frame-seconds threshold
<xxx> window <yyy>
<xxx>
<yyy>
To view this configuration, use the show running-config com-
mand in global configuration mode.
Fei and gei interfaces are supported, while sg interfaces are not
supported.
This example describes how to configure link Ethernet OAM port
error symbol frame-seconds statistics event parameters in inter-
face configuration mode.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#set ethernet-oam link-monitor frame-seconds
threshold 30 window 10
set ethernet-oam
link-monitor symbol-period
Use this command to configure port error symbol-period link event
parameters.
Interface Configuration
set ethernet-oam link-monitor symbol-period threshold
<xxx> window <yyy>
<xxx>
<yyy>
To view this configuration, use the show running-config com-
mand in global configuration mode.
Fei and gei interfaces are supported, while sg interfaces are not
supported.
Error frame-seconds, range: 1~900, default:
1 (frame-seconds: receiving at least 1 error
frame in 1 second)
Statistic period, in seconds, range: 10~900,
default: 60 seconds
Error frame limit value, range: 1~65535, 1
by default
Statistic period, range: 1~65535, default: 1