Show Mac Protect - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
commands
18 Confidential and Proprietary Information of ZTE CORPORATION
All modes
show mac port-info {interface <port-name>}
interface <port-na
me>
This example describes how to display the setting of the number
limit of the dynamic MAC address learned by the port fei_1/1.
ZXR10(config)#mac limit ethernet fei_1/1 100
ZXR10(config)#mac bind ethernet fei_1/1 enable
ZXR10(config)#show mac port-info ethernet fei_1/1
The fei_1/1 limit num = 100; current mac num = 10
Mac bind is enable
IP+MAC bind is disable
Mac learn is enable
Mac is learning
Mac protect is disable
Mac is not protecting
mac limit-num
mac protect
mac learn

show mac protect

Use this command to display the protection setting of the dynamic
MAC address learning on the port and the protection time of the
MAC address learning of the switch.
All modes
show mac protect [{interface <port-name>| protect-time}]
interface <port-na
me>
protect-time
This example describes how to display the protection setting of
the dynamic MAC address learning on the interface fei_1/1 and
the protection time of the MAC address learning of the switch.
ZXR10#show mac protect ethernet fei_1/1
The MAC protect is enabled.
ZXR10#show mac protect protect-time
The protect time is 300 seconds.
mac protect
mac protect time
Ethernet physical interface
Ethernet physical interface
MAC address learning protection time