Ip Dhcp Relay Max-User; Ip Dhcp Helper-Address Policy Vclass-Id - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instruction
Example
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Example
Related
Commands
84 Confidential and Proprietary Information of ZTE CORPORATION
show ip dhcp configure

ip dhcp relay max-user

Use this command to set the maximum users that DHCP Relay
supports.
Global configuration
ip dhcp relay max-user <max-user>
no ip dhcp relay max-user
<max-user>
The maximum users that DHCP Relay veneer supports is 2048.
Only when DHCP is in disable state, the configuration and deletion
operation that DHCP Relay supports can be executed.
This example shows how to set the DHCP Relay maximum users
to 5120.
ZXR10(config)#ip dhcp relay max-user 5120
show ip dhcp configure
ip dhcp helper-address
policy vclass-id
Use this command to configure the policy to choose external DHCP
Server on an interface.
Interface configuration

ip dhcp helper-address policy vclass-id

no ip dhcp helper-address policy vclass-id
By default, the interface use the DHCP Server configured by ip
dhcp relay server command.
This example shows how to use domain name to choose an exter-
nal DHCP Server on an interface.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip dhcp helper-address policy vclass-id
ip dhcp relay server vclass-id
ip dhcp enable
The maximum users that DHCP Relay veneer
supports, in the range of 1~32768.