Interface Supervlan; Inter-Subvlan-Routing - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Related
Commands
Purpose
Command Mode
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
46 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10(config)#interface supervlan1
ZXR10(config-if)#arp-broadcast enable
show interface
show supervlan

interface supervlan

Use this command to create a SuperVLAN and enter SuperVLAN
configuration mode. Remove the SuperVLAN with the no form of
this command.
Global configuration
interface {supervlan <supervlan-id>|<supervlan-name>}
no interface {supervlan <supervlan-id>|<supervlan-name>}
supervlan
<supervlan-id>
<supervlan-name>
� <supervlan-name> is in the format of "SuperVLAN" + Super-
VLAN ID, such as supervlan10.
� For T1200/T600/T128/T64E, the range of <supervlan-id> is
1~4096.
� For switch series, such as ZXR10 5928, the range of <superv
lan-id> is 1~255.
� For the router series, use the command interface {supervlan
<supervlan-id>|<supervlan-name>} to create a SUPERVC in-
terface. Use the command no interface {supervlan <super
vlan-id>|<supervlan-name>} to remove the SuperPVC inter-
face. The parameter <supervlan-id> ranges from 1 to 64.
This example describes how to create the SuperVLAN 10 and enter
SuperVLAN configuration mode.
ZXR10(config)#interface supervlan 10
ZXR10(config-if)#
exit
end

inter-subvlan-routing

Use this command to enable/disable routing between sub-VLANs.
SuperVLAN interface
inter-subvlan-routing {enable | disable}
SuperVLAN ID, range: 1~255
SuperVLAN name