Mac Learn; Mac Learning - Zte ZXR10 Command Manual

ZXR10 Command Manual (Ethernet Switch Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
10 Confidential and Proprietary Information of ZTE CORPORATION

mac learn

Use this command to configure the HIGIH interface to learn the
MAC address.
Global configuration
mac learn {normal | special}
normal
special
This command is supported by ZXR10 T160G/7800.
This example describes how to forbid the HIGIG interface from
learning the MAC address.
ZXR10(config)#mac learn special
show mac running

mac learning

Use this command to configure the physical port to dynamically
learn the MAC address.
Global configuration
mac learning {[interface <port-name>]|[vlan <vlan-id>]}{di
sable | enable}
interface <port-na
me>
vlan <vlan-id>
disable
enable
� After the MAC address learning is disabled on some interface,
this interface does not dynamically learns the MAC address,
but various MAC addresses can be added on the interface by
manual configuration.
� ZXR10 T160G only supports the configuration of dynamic MAC
address learning on the physical interface.
This example describes how to disable the Ethernet interface
fei_1/1 to learn the MAC address.
ZXR10(config)#mac learning ethernet fei_1/1 disable
show mac learning
show mac running
Permits the HIGIG interface to learn MAC
Denies the HIGIG interface to learn MAC
Ethernet physical interface
Vlan ID, range: 1~4094
Disables the MAC address learning
Enable the MAC address learning