Show Frame-Relay Lmi; Show Frame-Relay Map - Zte ZXR10 Command Manual

Function
Command Mode
Syntax
Syntax
Description
Instructions
Example
Function
Command Mode
Syntax
Instructions
Example
Related Command

show frame-relay lmi

Use this command to display information about FR lmi.
All modes except user EXEC
show frame-relay lmi [interface <interface-name>]
interface <interface-
name>
It is only applied to ZXR10 GAR and ZXE10 ZSR.
This example describes how to display lmi information of the FR
interface.
ZXR10#show frame-relay lmi
LMI Statistics for interface serial_1/1
(Frame Relay DTE)LMI TYPE=CCITT
Invalid Unnumbered info 0
Invalid dummy Call Ref 0
Invalid Status Message 0
Invalid Information ID 0
Invalid Report Request 0
Num Status Enq. Sent 8
Num Update Status Rcvd 2
LMI Statistics for interface serial_1/3
(Frame Relay DCE)LMI TYPE=CCITT
Invalid Unnumbered info 0
Invalid dummy Call Ref 0
Invalid Status Message 0
Invalid Information ID 0
Invalid Report Request 0
Num Status Enq. Rcvd 8
Num Update Status Sent 2

show frame-relay map

Use this command to show the IP-DLCI mapping table of FR.
All modes except user EXEC

show frame-relay map

It is only applied for ZXR10 GAR and ZXR10 ZSR.
This example describes how to show the IP-DLCI mapping table of
the FR interface.
ZXR10#show frame-relay map
serial_1/1(up): ip 150.1.1.2 dlci 100(0x64,0x1841) ,static,
IETF,status defined,active
serial_1/3(up): ip 160.1.1.2 dlci 100(0x64,0x1841) ,static,
IETF,status defined,active
frame-relay map
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 Frame Relay Protocol
Shows the information of the specified
interface
Invalid Prot Disc 0
Invalid Msg Type 0
Invalid Lock Shift 0
Invalid Report IE Len 0
Invalid Keep IE Len 0
Num Status msgs Rcvd 8
Num Status Timeouts 1
Invalid Prot Disc 0
Invalid Msg Type 0
Invalid Lock Shift 0
Invalid Report IE Len 0
Invalid Keep IE Len 0
Num Status msgs Sent 8
Num St Enq. Timeouts 0
25