1.2 Cli Command Modes - TP-Link JetStream TL-SL3452 Reference Manual

1.2 CLI Command Modes

The CLI is divided into different command modes: User EXEC Mode, Privileged EXEC Mode,
Global Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode.
Interface Configuration Mode can also be divided into Interface fastEthernet, Interface
gigabitEthernet, Interface link-aggregation and some other modes, which is shown as the following
diagram.
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Mode Accessing Path
Primary mode once it is
User EXEC
connected
Mode
switch.
Use
Privileged command to enter this
EXEC Mode mode from User EXEC
mode.
Use the
Global
command to enter this
Configuration
mode
Mode
EXEC mode.
Use
fastEthernet/gigabitEth
ernet port or interface
Interface
range
Configuration
gigabitEthernet port-list
Mode
command to enter this
mode
Configuration mode.
TL-SL3428/TL-SL3452
with the
TL-SL3428>
the enable
TL-SL3428 #
configure
TL-SL3428(config)#
from Privileged
the interface
TL-SL3428(config-if)#
fastEthernet/
TL-SL3428(config-if-
from Global
JetStream L2 Managed Switch CLI Guide
Prompt Logout or Access the next mode
Use the exit command to disconnect the
switch
connected through the Console port).
Use the enable command to access
Privileged EXEC mode.
Enter the disable or the exit command to
return to User EXEC mode.
Enter configure command to access
Global Configuration mode.
Use the exit or the end command or
press Ctrl+Z to return to Privileged
EXEC mode.
Use
gigabitEthernet port or interface range
fastEthernet/gigabitEthernet
command
Configuration mode.
Use the vlan vlan-list to access VLAN
Configuration mode.
Use the end command or press Ctrl+Z to
return to Privileged EXEC mode.
Enter exit or # command to return to
Global Configuration mode.
A port number must be specified in the
range)#
interface command.
10
(except that the switch
the interface fastEthernet/
to access interface
is
port-list