Ip Igmp Snooping Filter Maxgroup; Ip Igmp Snooping Filter Mode - TP-Link TL-SG2216 Reference Manual
Gigabit smart switch
Hide thumbs
Also See for TL-SG2216:
- User manual (183 pages) ,
- Configuration manual (771 pages) ,
- Reference manual (226 pages)
Table of Contents
Advertisement
Syntax
ip igmp snooping filter
no ip igmp snooping filter
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable IGMP Snooping filter function for port 3:
TL-SG2424(config)# interface gigabitEthernet 1/0/3
TL-SG2424(config-if)# ip igmp snooping filter
ip igmp snooping filter maxgroup
Description
The ip igmp snooping filter maxgroup command is used to specify the
maximum number of multicast groups for a port to join in.
Syntax
ip igmp snooping filter maxgroup maxgroup
Parameter
maxgroup —— The maximum number of multicast groups for a port to join in. It
is used to prevent some ports taking up too much bandwidth.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Specify the maximum number of multicast groups for ports 2-5 to join in as 10:
TL-SG2424(config)# interface range gigabitEthernet 1/0/2-5
TL-SG2424(config-if-range)# ip igmp snooping filter maxgroup 10
ip igmp snooping filter mode
Description
The ip igmp snooping filter mode command is used to configure the Action
mode for the desired port.
139
Advertisement
Table of Contents
