Access Set-Up Menu - Black Box 5000 series Reference Manual

Access Set-Up Menu

Option
1. Terminal set-up
2. Device set-up
3. Telnet set-up
4. Load FLASH set-up
5. Console
6. Hardware status
7. TFTP access
Enter option number, "=" - main menu, <TAB> - previous menu
>
The ACCESS SET-UP MENU provides options for saving and restoring the router configuration as well as paths to menus
for terminal, device, and remote access configuration.
1 - Terminal Set-Up
The Terminal Set-up option takes you to the Terminal Set-Up Menu, where the terminal parameters used for the router
console are selected.
2 - Device Set-Up
The Device Set-up option takes you to the Device Set-Up Menu, where the device name, password, dates, and times are
set and viewed.
3 - Telnet Set-up
The Telnet Set-up option takes you to the Telnet Access Menu, where you can connect to another router in the network
of routers.
4 - Load FLASH Set-Up
The Load FLASH Set-up option takes you to the Load FLASH Set-Up Menu, where you can update the software in this
device using TFTP or console Z-modem transfers.
Note: this operation cannot be performed from a secondary IP address.
Menus Reference Manual: Access Set-Up Menu
ACCESS SET-UP MENU
Value
menu
menu
menu
menu
menu
[disabled]
Description
- Define operator's console
- Set security/time/names
- Set up remote communications
- Prepare for software update
- Dump/restore configuration from console
- Display hardware information
- Allow TFTP configuration saves/loads
9